DIY: Light Steering wheel controls on an 03-04 Coupe - Page 2 - - Infiniti G35 & G37 Forum Discussion | rupromenergo.ru
Show Your Support Become A Premier Member

    > >
  • Reload this Page >
    • DIY: Light Steering wheel controls on an 03-04 Coupe


DIY: Light Steering wheel controls on an 03-04 Coupe

Thread Tools Rate Thread
Old 01-08-2009, 04:19 AM
Registered User
iTrader: (4)
Join Date: Jun 2005
Posts: 771
Thanked 39 Times in 24 Posts
Just finished mine (3am) also replaced my worn steering wheel with a very nice new one. Thanks again for the DIY, was very easy with it.
Old 01-08-2009, 06:38 AM
RickyGill's Avatar
Registered User
Join Date: Jun 2007
location: SoCal
Posts: 966
Thanked 4 Times in 4 Posts
nice write up man.
Old 01-08-2009, 01:16 PM
Manual G's Avatar
Registered User
iTrader: (7)
Join Date: Mar 2008
location: Pemberton, NJ
Posts: 341
Thanked 1 Time in 1 Post
Excellent write up..thanks
Old 06-07-2009, 05:36 PM
Frankieg35's Avatar
Premier Member
iTrader: (41)
Join Date: Oct 2006
location: South Jersey
Posts: 17,225
Thanked 852 Times in 740 Posts
Great writeup!! I just used it to swap out my steering wheel, very easy to follow..thanks!!
Old 06-08-2009, 12:20 PM
Registered User
iTrader: (2)
Join Date: May 2006
location: Edmond, OK
Posts: 1,240
Thanks: 0
Thanked 1 Time in 1 Post
very nice write up. good safety tips as well.
Old 06-11-2009, 05:54 PM
Registered User
iTrader: (1)
Join Date: Sep 2005
location: Austin, TX
Posts: 198
Thanked 7 Times in 5 Posts
I'm finally getting closer to performing this mod on my '04 coupe. Has anyone use the premium controls over the base control for the replacement? I believe the premium control replaces the standard "power" button with the "bluetooth" button (is this correct)? Does any one have an image of what the premium control looks like on an '05 or later coupe?

Here are the part numbers:
25550-AC700 for the non-premium equipped cars
25550-AC70A for premium equipped cars

Does the bluetooth button act as both the power AND the bluetooth phone activator? If the wiring harness is identical for the '04 and '05 then I assume that the bluetooth button also doubles as the 'Power' or the 'Mode' button on the '04 setup? The reason I am asking is if I decide to go with the premium controls, I am also going to be installing an aftermarket Pioneer HU + the Bluetooth adapter, would I be able to control turning the Bluetooth on/off from the steering wheel, or would I still have to touch the Pioneer HU screen to activate the Bluetooth?

Last edited by AustinG35; 06-11-2009 at 06:03 PM.
Old 07-10-2009, 06:40 PM
Registered User
iTrader: (1)
Join Date: Sep 2005
location: Austin, TX
Posts: 198
Thanked 7 Times in 5 Posts
I just completed this mod last night. Performing this mod for the first time, on a scale from 1 to 10, I put this around a 6, although, if I did it again, I would say it's about a 3 now. Besides thinking that I could complete this project from start to finish on a week night, turned into an uncompleted job and going to sleep at 4:30 the following morning...I had some issues with my soldering gun not working correctly, the removal and reinstallation of the IC pin connector into the grey connector under the clock spring hub, and the correct location for the pink grounding wire. Unless, you are already an electronics guru, IMO it might be useful to note for others looking to perform this mod, these couple of items to save them a considerable amount of time:

Under step 4, when you create a grounding wire with the pink wire, you had selected the torx bold that holds the horn plate and springs in. When I did this, I noticed as I was remounting the airbag back onto the steering wheel, that because of the physical width of the eyelet under the torx bolt, it causes the left side of the horn plate to be completely compressed down onto the spring which caused the entire air bag assembly to mount lower on the left side with no space between the airbag and the left control and leave about a quarter inch on the right side which was immediately noticeable. After a couple of hours of deliberating what to do, I did another search for anyone else who may have performed this same mod and found this link: http://rupromenergo.ru/forums/interio...oupe-easy.html
If you notice on page 1, post #9, he has a pic showing how he mounted his pink grounding wire (actually replaced with a thicker red wire). Instead of using the torx bolt, he used one of black screws to the right of the left torx bolt directly on the backplate (interesting to note, my steering wheel had the empty screw holes, but did not have screws in place, so I wasn't sure if this was something he added. I had to pick up a 5mm fine thread hex bolt (Neither Autozone nor Home Depot sold the nice gun metal cross tip fine thread like he has...) and this alleviates compressing the spring so that the airbag assembly and horn fit and work correctly.

http://rupromenergo.ru/forums/attachm...sy-strgwh3.jpg


Under step 6, I attempted to remove the IC pin from the original steering wheel controls, and quite simply, the easiest method is to use a pair of metal shears (or some heavy duty equivalent) and cut longways down the old steering wheel connector and careful remove either the red or black wires (both are the same length.) Also, the now recovered wire with the IC pin will not go into the grey connector unless you first release the white tab by putting a tiny jewelers screwdriver into the pin socket and pushing towards the white tab that is on the top of that grey connector. Had I known this in advance, I could have saved at least an hour plus at least 3 bent IC pins in the process. Once that white tab is up, the new IC pin and wire goes into the hole with no problems.


All in all, the controls look great. BIG difference now in the "nighttime" appearance!

Last edited by AustinG35; 07-10-2009 at 06:45 PM.
The Following User Says Thank You to AustinG35 For This Useful Post:
Smeghead (01-30-2016)
Old 08-12-2010, 04:21 PM
Registered User
iTrader: (8)
Join Date: Apr 2009
location: Boston
Posts: 535
Thanks: 0
Thanked 0 Times in 0 Posts
hate to revitalize an old thread, but if I bought an 05 steering wheel, can I just replace my 04 steering wheel with it? Will the airbags from my 04 fit directly into the 05 steering wheel?
Old 08-12-2010, 06:48 PM
G SEDAN's Avatar
Registered User
iTrader: (94)
Join Date: Jun 2006
location: Southern California
Posts: 17,054
Thanked 16 Times in 13 Posts
for the most part yes, but you have to rewire in order for your switches to light up.
Old 08-25-2010, 04:40 AM
socalwdup's Avatar
Banned
iTrader: (3)
Join Date: Jan 2010
location: Santa Monica
Posts: 1,030
Thanked 4 Times in 4 Posts
pics of completed thang?
Old 09-18-2010, 01:02 AM
JAYRIPPA420's Avatar
Registered User
iTrader: (1)
Join Date: Oct 2009
Posts: 109
Thanks: 0
Thanked 3 Times in 3 Posts
nice diy bro ....not worth the time for my taste lol but great write up man .....many will appreciate ur time n effort.
Old 10-29-2010, 08:29 PM
Registered User
iTrader: (2)
Join Date: Mar 2008
Posts: 334
Thanks: 0
Thanked 2 Times in 2 Posts
does anyone know what is used to remove this..?


Last edited by berniEE; 10-29-2010 at 08:34 PM.
Old 11-12-2010, 07:43 PM
Registered User
Join Date: Nov 2010
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
G'day guys

What is everyone doing with the old controls?

I'm thinking of putting together a group buy for cruise control (unbelievable that nearly all the 35 series cars imported here don't have it) on SAU (Skylines Australia forum) and it will come up about the steering wheel controls for cruise and audio.

Now some people will want the ones that light up, just like you guys did, and they can get them from Performance Nissan or elsewhere in the States. But others might be just as happy with used ones.

The new price for the ones with lights is around $80 plus ~$30 shipping to Aust (less for multiple items) so if you were asking about $50 shipped (totally up to you of course) I think you would get some takers. I know, not a lot of money but you do get a warm fuzzy feeling by recycling & you get to add some joy to someones’ life on the other side of the world

Is anyone interested in selling their old panels and buttons?

Cheers.
Old 03-21-2011, 04:01 PM
Registered User
iTrader: (1)
Join Date: Sep 2005
location: Austin, TX
Posts: 198
Thanked 7 Times in 5 Posts
Wanted to revisit one last time - in regards to running the new power wire to get these controls to light up, under Step 5, you had recommended splicing into the VDC button wiring harness. One thing I noticed is that when you use that as your power, the steering wheel controls stay 'on' regardless if you dim the rest of your guage cluster lights (the steering wheel lights do not dim like they would on an '05 or later model)
Not a big deal, but was wondering if you had a better power splice location to get the steering wheel controls to dim when the guage cluster is dimmed?
Old 06-28-2011, 04:16 PM
draco1020x's Avatar
Registered User
Join Date: Mar 2009
location: Connecticut
Posts: 264
Thanked 1 Time in 1 Post
Quote:
Originally Posted by berniEE View Post
does anyone know what is used to remove this..?


i need to know the same thing

Related Topics
Thread Thread Starter Forum Replies Last Post
FS: 03-04 G35 Double Din Kit Black Plur Audio/Video/Electronics 6 08-11-2016 09:40 PM
G35 Sedan Spindle Knuckle Assembly teamghost Brakes & Suspension 1 07-28-2015 05:52 PM
ES Compression Rod Gap is NOT okay! itschuckster G35 Sedan V35 2003-06 2 07-25-2015 09:07 AM
Wanting to Buy a G35 (350GT) my events Karnicle G35 Sedan V35 2003-06 1 07-23-2015 06:08 AM
Grinding noise on cold start (felt in brake pedal) tehmoonrulz Brakes & Suspension 1 07-19-2015 11:44 PM


Tags
0304, 04, 2005, 25550ac700, control, controls, coupe, diy, g35, infiniti, light, putting, removal, rotors, steering, wheel, working
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 01:25 AM.


Copyright ©2002 - 2017, rupromenergo.ru All Rights Reserved. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Related pages


2007 mazda 3 performance chipg35 vs m35g37 performance partsg35 audio upgradetail lights blacked outburning smell from engine2009 nissan maxima body kitsis stp oil treatment any goodgtr g35aem bypass valveddx470 kenwoodinstalling injectorsmobil 1 or castrol1080 scotchprintlexus license plate framesgte performance chip08 infiniti m455x120 lug pattern carsnexen tire reviewsct emissions due datetein spring ratesforgiato staggered rimsg37 oildoes dr colorchip workhow to drive stick shift smoothlyavic 700btoil change mr lube cost300zx throw out bearingstruts reviewi want moar4.3 v6 stroker kittein s tech vs h tech2003 g35 coupe specsroad paint removerg37 service manualmegan racing mufflersrohana rc10 for saleplasti dip wheel cleanerfat lip rims350z aftermarket rimsbc racing br coilovers reviewlexol vinylex protectantvq35de engine for saleinstalling a throttle body spacer3m di noc ca 421cr2025 3v walmartremove pioneer stereog35 shockswhat cars have timing chainspnc auto payoffhow much to bleed brakesameriprise costco insurance reviewg35 coupe aftermarket headlightsrain leak solutionscsx3 air freshenerwhat does the bcm control350z 4 seaterpep boys oil changeracelandsinfiniti g35 brembo brakesadaptive one ceramic brake padsdifference between ngk spark plugsbuy optima batterykoenig monster wheelsjet performance chips reviewshow much is a paint job from maacohow to smoke tail lights with vhtworks bell short hubtire fitment calculator2012 infiniti g37 0-60lexus ls430 forumburn mp3 cd with windows media playercost of replacing headlight bulb2003-2006 infiniti g35flywheel dynoaltered atmosphere motorsportscar brakes shuddertesting camshaft position sensor15mm spacerstoyo tr1