Hey there - I'm wondering about something:
If you wanted to go from Bremo's to Akebono on a 2003-2006 G35 Coupe - can you use the existing brake lines you've already got?
What I mean is this. Brembo's have a small hard line that screws *into* the back of the caliper and does NOT use a Banjo Bolt like the OEM non-Sport brakes do. (and like the shortened banjo bolt the Stoptech SS replacement lines do too). This hard line then attaches to the block connector end of the two part rubber lines which run from the suspension parts to the inner wheel well at a bracket (clipped in place by a flat spring of sorts) where it screws into the body hard line.
For that matter, are the rubber & block part of the brake lines the same on G35's, 350Z, G37 & 370Z's with the only difference being the little hard line that connects to the calipers of either Brembo & Akebono vs the rubber line + Banjo Bolt for the non-sport models of each?
And if they are different, do you need a set of the Akebono hard lines + rubber & block lines from a 370 or G37 to mate with the Akebono brakes? Or just one part of the lines and not the other?
I hope asked all that in a way that makes some semblance of sense lol!