DIY - Transgo Valve Body Upgrade - Page 4 - - Infiniti G35 & G37 Forum Discussion | rupromenergo.ru
Show Your Support Become A Premier Member

    > >
  • Reload this Page >
    • DIY - Transgo Valve Body Upgrade


DIY - Transgo Valve Body Upgrade

Thread Tools Rate Thread
Old 09-28-2010, 10:00 AM
Registered User
Join Date: Sep 2010
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Of course, a high-performance torque converter matched to the engines power curve, the cars weight and its rear gear ratio will also make a positive difference in the performance of your TH350. A good shifter is also necessary to make the most of your automatic. Christensens final comments are that a good transmission cooler and an extra-deep, finned transmission oil pan will help keep temperatures down. That will greatly improve the durability of your TH350.
******************

Old 11-04-2011, 08:05 PM
Registered User
Join Date: Apr 2011
Posts: 12
Thanks: 0
Thanked 1 Time in 1 Post
I know this is a bit of an older thread. But I just have one question for everyone who's done this mod. Did it feel like there was less power loss through the autobox at all? As in, did it feel like it accelerated harder? Or is the only thing that changes the gearshifts? I have no idea about auto gearboxes.
Old 11-06-2011, 08:56 AM
Registered User
iTrader: (9)
Join Date: Apr 2010
location: Indiana
Posts: 629
Thanked 11 Times in 9 Posts
J coote, yes, it definitely decreases the feeling of power loss through the trans. I took my car to the track before the upgrade and lost so much time at each shift waiting for the slush box to move to the next gear. With this upgrade the shifts are much quicker so you're on to the next gear quicker and accelerating again. I'd also recommend a trans cooler being installed while you are down there.
Old 11-07-2011, 07:08 AM
Registered User
Join Date: Apr 2011
Posts: 12
Thanks: 0
Thanked 1 Time in 1 Post
Thanks for the reply. I've got it sitting at home, but I only read through the DIY properly the other day and didn't realise I gotta drill holes in parts to make it work. I thought I could always put it back to stock if I didn't like it, so now i'm putting it off haha.

Cause I dont drive in manual mode much and so it sounds like if i'm hooking around a long corner with foot flat, and it changes from say 2nd to 3rd, it'll step out on me. And if VDC is on it'll probly step-out a bit and then bog down as it reduces power and brakes certain wheels. This about right?
Old 11-08-2011, 10:18 PM
Registered User
iTrader: (32)
Join Date: Apr 2010
location: missouri
Posts: 328
Thanked 8 Times in 8 Posts
This is the best mod Ive done to my G. Ive installed 3 so far and the install is very easy if you stay organized and take your time.
Old 02-11-2012, 09:52 PM
Registered User
iTrader: (4)
Join Date: Oct 2007
location: o-town & west palm beach FL
Posts: 5,266
Thanked 351 Times in 212 Posts
nice
Old 03-03-2012, 04:20 AM
chink-ah-saur's Avatar
Registered User
iTrader: (13)
Join Date: Jul 2010
location: AsiaSF,ca
Posts: 2,942
Thanked 297 Times in 242 Posts
Ok maybe someone can help.
So I have a 06sedan and the instruction shows a slightly different plate so I am not sure about the exact locations to be drilled.
Thanks.
Name: DSC05759.jpg
Views: 73
Size: 83.6 KBName: IMG_1299.jpg
Views: 71
Size: 100.9 KB

Last edited by chink-ah-saur; 03-03-2012 at 04:47 AM.
Old 03-03-2012, 04:46 AM
chink-ah-saur's Avatar
Registered User
iTrader: (13)
Join Date: Jul 2010
location: AsiaSF,ca
Posts: 2,942
Thanked 297 Times in 242 Posts
Hmm now that I look close it seems that all the drill spots are the same
Old 07-18-2012, 03:08 PM
Registered User
iTrader: (5)
Join Date: Feb 2012
location: Indiana
Posts: 51
Thanked 2 Times in 2 Posts
Great write-up!!...just ordered mine today....can't wait for the weekend!!
Old 11-05-2012, 04:54 PM
Registered User
iTrader: (1)
Join Date: Mar 2012
location: Tampa, FL
Posts: 121
Thanked 0 Times in 0 Posts
feel like id screw something up if i tried it myself...sucks it costs so much to have a shop do it though
Old 06-10-2013, 10:13 PM
Registered User
Join Date: Sep 2012
Posts: 6
Thanked 0 Times in 0 Posts
I know this is a slightly older thread but I just rec'd my Transgo Shift Kit in the mail today and will be installing in the next couple of weeks. Thanks for the write up and great instructional.

Skyline300
Old 08-05-2013, 09:05 PM
Registered User
Join Date: Feb 2011
location: Scottsdale, Az
Posts: 20
Thanks: 0
Thanked 1 Time in 1 Post
Quote:
Originally Posted by j_coote View Post
I know this is a bit of an older thread. But I just have one question for everyone who's done this mod. Did it feel like there was less power loss through the autobox at all? As in, did it feel like it accelerated harder? Or is the only thing that changes the gearshifts? I have no idea about auto gearboxes.
Yes, but for my personal preference, I also lost the smoothe feel of the Automatics gear shift. It took some time to get used to the double down shift as well.
Old 08-08-2013, 09:05 PM
Registered User
Join Date: Jun 2013
location: Haines city, FL
Posts: 784
Thanked 51 Times in 45 Posts
Question? I heard that with the Osiris tuner program you can change the shift pressures for the 5at coupes. What does this VB upgrade do? Can the same results be Achieved with the tuner program?
Old 10-23-2013, 01:25 PM
Registered User
iTrader: (1)
Join Date: Aug 2003
location: New York City / Long Island
Posts: 977
Thanks: 0
Thanked 6 Times in 6 Posts
Hate to bring old threads back to life but need advise from those who got this kit. I have g35 and my tranny just failed. I pulled the codes and it seems that the valve body and the solenoids failed. Does anyibe know if this kit will be worth buyibg to put in a new vb or is there a chance that the rest of the transmission need to be overhauled?
Old 12-08-2013, 07:31 PM
Registered User
Join Date: Sep 2012
Posts: 6
Thanked 0 Times in 0 Posts
Again, bringing an old thread back from the grave...
I just installed this kit on 12/7/13. The install was easy, given that I have never worked on a tranny before. As JJSolon said, if you are organized and work slow and steady, it is relatively easy. I noticed at first that the shifts were a little harsh, but, after 20-30 miles was put on it (which during this time, I went very easy on the tranny so all the air could be worked out) I noticed that the shifts were much much smoother. They got firmer, faster and they felt very solid. You can feel the push as it enters the next gear. I have been able to chirp the tires in both 2nd and 3rd gears. Overall, I'm very pleased with this upgrade.

Last edited by Skyline300; 12-08-2013 at 07:38 PM.

Related Topics
Thread Thread Starter Forum Replies Last Post
Cleaned Throttle Body and now Idle Hunt, ECU Reflash or New TBs? esotericrider G35 Sedan V36 2007- 08 19 07-29-2017 11:58 AM
FS: 19x8.5 Concept One RS8 matte black w/chrome $1k obo Machine Head 19 Inch 3 03-16-2016 09:55 PM
deal or no deal? TrillO.G.35 G35 Coupe V35 2003 - 07 14 09-05-2015 03:06 AM
Fixed inifiniti's brake design flaw with Nissan akebono big brakes Machine Head G35 Sedan V35 2003-06 19 09-04-2015 08:22 PM
Valve cover change - Oil on spark plug - compilation thread yassy G35 Sedan V35 2003-06 3 08-09-2015 08:31 PM


Tags
body, diagram, g35, g37, infiniti, kit, my350z, o2, problem, solenoid, spring, transgo, upgrade, valve, valvebody
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 10:12 AM.


Copyright ©2002 - 2017, rupromenergo.ru All Rights Reserved. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Related pages


osram cool blue intensedeatschwerks injectorstinting laws in california255 35 zr20 tireshow much is oil change at mr lube2003 350z turbo kitsynchrorevexhaust body cut outhow does dynamat workcusco differentialhand waxerwindshield repair kit canadian tire350z gas capjdm powervq35de camsinfiniti paint codesinfinity g37 horsepower18 inch rota gridsmetra interfacelexus sc430 0-60install k&n air filter18x10 xd9mazda speed 3 forumrx8 clutch pedal assemblydefi link gauges350z mastergrade wide body kitt3 t4 hybrid turbo review3m color stable tinteibach shocks and strutstreo subwoofers for salenismo suspension 350zcar smells like burning oilvq35detmagnaflow glasspack soundfront wheel bearing hub assembly replacement cost350z eibach pro kitflange exhaustforum girlsdopornvaleo vs bosch wipersinfiniti g37 seat coversturning slotted rotorsmtec bulbspinnacle infinitiventus v12 evo reviewrb26 motorinfinity reference 6030csporting and polishing headsfake turbo blow off valvemelissa theuriau hot picsoil in combustion chamber spark plugblinking service engine soong35s sedanphilips d2s 35w 85122how to remove service engine soon lightdipstick covered in oilactive green and ross scarboroughjetta boser hoodintake g372007 infiniti m45 problemscoolant mixed with engine oilhyper silver paint codehow to repair polyurethane bumpernessen forged wheels for saleparadigm dsp-3100wheel hub assembly symptomsjag motors el paso txwhat does staggered wheels meang35 coupe sub boxorr dealershipswheel hub assembly symptomsg37 coupe vs sedant1 15 rockford fosgatecustom hub ringsball joint press autozonesubwoofer 6x9g37 nismonissan pathfinder service engine soon light2008 nissan 350z 0-60strut bushingtracklite rimspermaseal reviewsalpine 1000w amp