fuel injector and throttle body flush service? - - Infiniti G35 & G37 Forum Discussion | rupromenergo.ru
Show Your Support Become A Premier Member

    > >
  • Reload this Page >
    • fuel injector and throttle body flush service?

fuel injector and throttle body flush service?

Thread Tools Rate Thread
Old 07-04-2006, 02:38 AM
Registered User
Thread Starter
Join Date: May 2005
location: Studio City, CA
Posts: 358
Thanks: 0
Thanked 0 Times in 0 Posts
fuel injector and throttle body flush service?

i had my 15,000 service done at a dealership (Miller) and I went to a different dealership (glendale) to get my 18750 mile oil change. anyway, the service manager says to me that i havn't gotten my "fuel injector and throttle body flush service" done yet. I said "but I did the 15000 service", he said that he saw that in the computer, but that its a seperat service that should have been done at 15,000 miles. He offered to do it for $140 but I said I needed to consult rupromenergo.ru first.

Any thoughts? should I do it, was he trying to rip me off (i didn't see anything about this in the manual)? I am looking at this not only from the perspective of trying to keep my warranty (i know, even if I don't do it, the burden of proof is on them to show causation b4 denying warranty service - I'm a law student), but also from the perspective of just keeping my car running properly and keeping it reliable for a long time. But, I am a student, so I don't have a lot of money or time to spend on the car.

by the way, they ended up doing the oil change for free b/c it was taking too long (they said 1.5 hours for oil change, wash, and some warranty work) and 1.5 hours later i went to my service manager and inquired if it was ready, and he offered to comp the service because it was taking too long (an extra 15 min). which I thought was really nice.

thanks for any info
Old 07-04-2006, 08:24 AM
Registered User
iTrader: (1)
Join Date: Oct 2003
location: NoVA/Columbus, OH
Posts: 1,067
Thanks: 0
Thanked 0 Times in 0 Posts
Yeah. He's trying to rip you off. Punch that sucker in the face and walk away. You can clean the TB yourself and there is no need for fuel injector flush especially at 15k miles.
Old 07-04-2006, 04:18 PM
Registered User
Thread Starter
Join Date: May 2005
location: Studio City, CA
Posts: 358
Thanks: 0
Thanked 0 Times in 0 Posts
i generally use chevron, but should i get some concentrated techron?
Old 07-08-2006, 08:51 PM
Former rupromenergo.ru Vendor
iTrader: (93)
Join Date: Sep 2004
location: So. Cali - Rowland Hts
Posts: 9,524
Thanks: 0
Thanked 2 Times in 1 Post
he's not trying to rip you off.. its a suggested service.. IMO have the throttle body cleaned at your next service.. as far as fuel injector goes you can just ask them how its serviced.. if they just add an additive in your gas tank then decline that service and ask to purchase the additive and you'll do it yourself.. but do not go out to autozone to buy a fuel injector cleaner.. it may damange your injectors.. but as far as cleaning the TB goes.. if you know how to do it urself then go ahead and do it.. you'll see a carbon build up after a year of driving.. if you do do it urself please do not physically touch the throttle plate even if its disconnected.. 140 is a pretty fair price.. thats abount an hours worth of labor and parts.. the dealer i work at we charge $109 per hr of labor (labor isnt taxed)

rookie84.. technically you can performe ALL services on the vehicle yourself.. so does that mean that everything a dealer offers a rip off?
Old 07-10-2006, 08:13 PM
Registered User
Join Date: Jul 2002
location: Walnut, the one in So-Cal
Posts: 669
Thanks: 0
Thanked 0 Times in 0 Posts
i had the throttle body apart(when i was installing the md 1/2" spacer), i cleaned it with wd40 and wiped all that gunk off with rags.......now i physically moved that plate so i can clean the other side....it idled and ran w/o any problems after putting everything back and resetting ecu via battery disconnect.......did i dodge a bullet by messing with that plate?
Old 07-10-2006, 11:40 PM
Registered User
iTrader: (2)
Join Date: Dec 2004
Posts: 923
Thanks: 0
Thanked 0 Times in 0 Posts
Its best not to mess with the TB if you can help it. Best practice is to try to keep it electrically connected if you have to fool with it. If you disconnect or move the throttle plate, you may have to relearn idle etc. with the pedal method. But spraying it clean with Berryman's/Gumout carb clean etc. shouldn't hurt anything. I have over 70K miles on mine and looked at the TB during the spacer install and it wasnt bad at all. I think that whole service is a stealer profit booster. At 100K maybe, but at the 15K service. Uh, no. Next sucker please.
Old 07-11-2006, 05:42 AM
richie's Avatar
Registered User
iTrader: (46)
Join Date: Jan 2003
location: LA, CA
Posts: 1,703
Thanks: 0
Thanked 6 Times in 5 Posts
how did you guys clean the gunk/carbon build up that is close to the plate without touching/pushing it? would it be okay to put the key in the ON position and hold the gas pedal down so the plate moves to the open position, then clean it?

i've been searching around but never found a DIY on cleaning the throttle body.... i just found posts stating that they cleaned it but never the instructions on what to and what not to do.

Related Topics
Thread Thread Starter Forum Replies Last Post
Gonna need a new tranny..a couple questions bryanr Drivetrain 15 09-30-2015 07:31 AM
2004 Infiniti G35 Sedan Fuel problem? Rhinos7777 Engine, Drivetrain & Forced-Induction 3 09-06-2015 06:36 PM
P1239 Faulty Electric Throttle Control Actuator Freeman186 Engine, Drivetrain & Forced-Induction 0 09-05-2015 12:28 AM
FS: UTEC Engine Management System SilverG123 Engine - Electrical 1 09-04-2015 02:12 PM

bodies, body, cleaning, flush, fuel, induction, injection, injector, injectors, job, price, service, throttle, worth, wrx
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -4. The time now is 05:24 PM.

Copyright ©2002 - 2017, rupromenergo.ru All Rights Reserved. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
  • Ask a Question
    Get answers from community experts
Question Title:
Your question will be posted in:

Related pages

huper optik tintcvt vossenddx418 kenwoodkranze cerberusevo x hood dampersblue loctite removalwearever brake pads reviewstruts reviewsundown audio sa15how to fix broken exhaust flangebosch platinum fusioncar ramp autozonebarnegat fishin holehks exhaust systemsg37s coupe 0-60works wheels vs xxwheelfire.com reviewfjo racingstillen g37ame shallen wheelstoll booth willie videohid bulb d2s350z air ride suspensionrear clunking noise over bumpsreplace xenon headlight bulbfno1rcg35 sedan weightnorcal srt4nissan frontier throttle bodytire plug sidewallcostco car polisherroad force balance coststance coilovers rsxmrr wheelelementwheels.comgodspeed turbo kit reviewcostco car canopy 10x20335 0-60tein tie rodspep boys transmission flushk sport air suspensionobd2 programmer androidmotomaster wiper bladesg35 hpeagle one nevr dulllexani grillgdriverborla exhaust vs magnaflow350z nismo headerscostco gas newmarketreprogram ecmvossen wheel weightfuel injection clampsmoly brake lubeinner and outer tie rod pricexxr 526 silverhow does vvti workups customer center calgaryryan snider paintless dent repairhawian tropic girlspurolator pure one pl14612how to hook up amp and sub to stock radionissan coil packwhere is bank 2 catalytic converter locationbrake caliper paint colors100k miles maintenancemetal push rivets5th gen maxima modscompuplus.comd2s bulbsaverage cost to tint windows350z stockair intake resonatorsprint booster installservice engine soon blinkinghid 8000k bulb03 altima crankshaft position sensor