NWP Big Bore 75mm Throttle Body Kit Review - - Infiniti G35 & G37 Forum Discussion | rupromenergo.ru
Show Your Support Become A Premier Member

    > >
  • Reload this Page >
    • NWP Big Bore 75mm Throttle Body Kit Review


NWP Big Bore 75mm Throttle Body Kit Review

Thread Tools Rate Thread
Old 09-04-2013, 05:50 PM
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2012
Posts: 159
Thanked 14 Times in 10 Posts
NWP Big Bore 75mm Throttle Body Kit Review

As soon as I heard about the release of this kit I was stoked. I have been looking for new ways to improve performance out of my NA G Coupe without boosting and I have basically every bolt on already. The day it was available for sale I purchased it!



I installed the thing as soon as it was delivered to my house. Initial reaction was that everything felt and looked solid. no flimsy materials and everything provided for a direct bolt on.



Only thing you will need is a 3.5" to 3" reducer coupler if you're using a stock intake or sometime you can stretch the 3" coupler over the throttle body. whatever works.... It is a perfect fit with stock plenum or the kinetix velocity manifold. it does not touch the hood.

Once the throttle body was installed, I started the car up and initially it threw the check engine light. I performed the ecu reset, idle relearn and the codes were gone and have not come back. You can immediately feel a power gain even with the stock intake. I could feel the car rev much more responsively, but I felt that I could get even more power out of this thing. I had a custom 3.5" furookie type intake fabbed up and paired it up with a JWT pop charger and wow this thing really woke up! The car definitely needs a good tune at this point but even without it the good ol' butt dyno says this thing is well worth the money.



I cut the throttle body warming hoses off also because i didn't want random empty hoses showing.
Old 09-07-2013, 08:20 AM
Blue Dream's Avatar
I drove ttrank's car solo
iTrader: (50)
Join Date: Mar 2009
location: By the sea, Tx
Posts: 16,535
Thanked 1,221 Times in 987 Posts
Good to hear. Mine's sitting at home, but I'm out of town until Monday so baby's getting her new toy then.
Old 09-07-2013, 10:38 AM
Registered User
iTrader: (2)
Join Date: Jun 2009
location: NC
Posts: 1,667
Thanked 228 Times in 179 Posts
I'd been planning on holding mine off to the side until my new engine is ready but I'm getting impatient.... Just sent out the TB, Velocity and lower runners to be ported/polished. I don't think they're gonna be sitting on the shelf when I get them back.
Old 09-07-2013, 11:46 AM
Registered User
Join Date: Jun 2013
location: Haines city, FL
Posts: 784
Thanked 51 Times in 45 Posts
Has your gas mileage changed?
Old 09-07-2013, 08:46 PM
Registered User
iTrader: (5)
Join Date: May 2012
Posts: 337
Thanked 6 Times in 6 Posts
Same here want to upgrade my intake this is a great product for the cost. Can you pM me pics of the intake and set up I can't see the pics thanks
Old 09-07-2013, 08:57 PM
Registered User
iTrader: (5)
Join Date: May 2012
Posts: 337
Thanked 6 Times in 6 Posts
Quote:
Originally Posted by Jairen View Post
I don't have a dyno, but my butt dyno says there is some gain up top. I've come to know my top end really well from the hundreds of passes at the strip. Above 6000rpm, it has more pull. Nothing mind blowing, but I know it's there.

When I installed it, I also had a CEL with a high idle. Did all of the reset procedures and worked well.

Not sure what happened the other day. I did a total of 8 laps around the Nurburgring. 4 "slow" and 4 fast laps. After I was completing all of my laps, the high idle came back for some reason. No biggie. I just did the TB reset procedure and it was back to normal. Also, the black plastic part of the TB rubs against my hood.
reason why its rubbing on the hood is due to the SSV. it sits higher than stock plenum because i had installed the TB before i put a 5/16 spacer and wasnt rubbing, but after it started to rub. i just make sure i dnt slam the hood down though. so far loving the new TB just want to get tuned though.

i am interested in where you had your intake Fabricated and if maybe another could be made and sent my way
Old 09-26-2013, 06:52 PM
Registered User
Join Date: Dec 2011
location: Florida
Posts: 33
Thanked 0 Times in 0 Posts
Whats the bore of our stock throttle body? Also anyone know if a throttle body spacer is any good on our platform? I got a pretty hefty set of bolt ons on my 06 6mt g35. K&N drop in, Z tube, Kinetix upper plenum, Motordyne MREV2 lower plenum Motordyne ART test pipes, and Borla Cat back exhaust. I feel like im bottle necking at the throttle body and don't know if a spacer will do the trick to increase velocity after the throttle body or what? any suggestions. Oh Im also buying Osires UpRev standard tune soon once I decide on the final intake mod.
Old 09-26-2013, 07:04 PM
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2012
Posts: 159
Thanked 14 Times in 10 Posts
Quote:
Originally Posted by cbrg35 View Post
Whats the bore of our stock throttle body? Also anyone know if a throttle body spacer is any good on our platform? I got a pretty hefty set of bolt ons on my 06 6mt g35. K&N drop in, Z tube, Kinetix upper plenum, Motordyne MREV2 lower plenum Motordyne ART test pipes, and Borla Cat back exhaust. I feel like im bottle necking at the throttle body and don't know if a spacer will do the trick to increase velocity after the throttle body or what? any suggestions. Oh Im also buying Osires UpRev standard tune soon once I decide on the final intake mod.
dont quote me on this but i think its 68mm
Old 09-26-2013, 07:06 PM
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2012
Posts: 159
Thanked 14 Times in 10 Posts
Quote:
Originally Posted by Jairen View Post
I don't have a dyno, but my butt dyno says there is some gain up top. I've come to know my top end really well from the hundreds of passes at the strip. Above 6000rpm, it has more pull. Nothing mind blowing, but I know it's there.

When I installed it, I also had a CEL with a high idle. Did all of the reset procedures and worked well.

Not sure what happened the other day. I did a total of 8 laps around the Nurburgring. 4 "slow" and 4 fast laps. After I was completing all of my laps, the high idle came back for some reason. No biggie. I just did the TB reset procedure and it was back to normal. Also, the black plastic part of the TB rubs against my hood.
I asume you have the V+ since you mentioned black plastic. I have the SSV myself with a strut bar over it and it seems to clear just fine. are you using a spacer with the v+ also?
Old 09-26-2013, 07:44 PM
Registered User
iTrader: (5)
Join Date: Apr 2009
Posts: 8,306
Thanked 469 Times in 416 Posts
anyone know wat car this tb was actually made for? it says hitachi on it who makes oem tb for nissans and probably some other cars as well
Old 09-26-2013, 07:48 PM
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2012
Posts: 159
Thanked 14 Times in 10 Posts
Quote:
Originally Posted by saywat? View Post
anyone know wat car this tb was actually made for? it says hitachi on it who makes oem tb for nissans and probably some other cars as well
2011 Nissan Maxima
The Following User Says Thank You to thisiswang For This Useful Post:
saywat? (09-26-2013)
Old 09-27-2013, 10:40 AM
LoSt180's Avatar
Premier Member
iTrader: (11)
Join Date: Mar 2011
location: Maryland
Posts: 2,398
Thanked 366 Times in 305 Posts
Quote:
Originally Posted by saywat? View Post
anyone know wat car this tb was actually made for? it says hitachi on it who makes oem tb for nissans and probably some other cars as well
2009+ Maxima

This mod has been popular on the Maxima forums for a little while now, catching on with other platforms now since NWP has made it plug-n-play.
Old 09-27-2013, 03:12 PM
Registered User
iTrader: (5)
Join Date: Apr 2009
Posts: 8,306
Thanked 469 Times in 416 Posts
^ wat do u mean this mod is popular with maxima owners if the tb came on the car stock?
Old 09-27-2013, 03:31 PM
LoSt180's Avatar
Premier Member
iTrader: (11)
Join Date: Mar 2011
location: Maryland
Posts: 2,398
Thanked 366 Times in 305 Posts
Quote:
Originally Posted by saywat? View Post
^ wat do u mean this mod is popular with maxima owners if the tb came on the car stock?
It's popular for Maxima owners with pre-2009 models since their TB is also smaller.
Old 09-27-2013, 03:34 PM
Registered User
iTrader: (5)
Join Date: Apr 2009
Posts: 8,306
Thanked 469 Times in 416 Posts
I see. I hope someone dynos this. im very curious

Related Topics
Thread Thread Starter Forum Replies Last Post
G35 Speed Project G35VSHNG37 G35 Coupe V35 2003 - 07 17 10-25-2015 09:43 PM
Vortech supercharger info pls jbelf23 Forced Induction 9 10-24-2015 01:32 PM
G35 Sedan Nismo Body Kit PrestigeG35 G35 Sedan V35 2003-06 3 08-18-2015 05:47 PM
Getting P1128 code - Throttle Control Motor Circuit Short Hasanbaloch Engine, Drivetrain & Forced-Induction 5 07-19-2015 03:13 PM


Tags
2009, 75mm, big, body, bore, coupler, fits, g35, kit, maxima, nwp, review, set, size, throttle
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 10:24 PM.


Copyright ©2002 - 2017, rupromenergo.ru All Rights Reserved. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in:

Related pages


350z unichipbird poop luckduralast brake pads reviewturbonetics 350z turbo kitg35 lug nutsfr-s rocket bunnyinnova obd2 scannerduncanracing2006 infiniti g35 floor matsk&n cold air intake canadaconcept one wheels rs 55ramsey infinity2003 infiniti g35 reliability240sx fog lightsg35 greddy exhaustg35 coupe vs g37 coupepioneer avh p4400bhcarbon fibre wrap interiorair in coolant system symptomsskyline tintwolfgang fuzion reviewtop gear infiniti g37edge racing convertersfunction form coiloverscustom rear diffuserwifi odb2vq35 camswedssport sa55m for salemorimoto projectornissan 350z engine swaprace slickstrashy carsakebono brake shoesorion hcaacloudy headlight coversmaya stm wheelswheelfire.comhigh output alternator for car audiomotorwerks infinitinail in sidewallbelair direct car insurance quotes online7th gen accord coupetorque settings for flywheel boltsfastco enginesinfiniti g35 wiki350z ark exhaustinfiniti g35 wiper bladesskene license platetl vs g352003 g35 coupe specssportlinesinnovate lc1 manualjl 500 1 manualaxle back exhaust vs cat backhow to replace battery on nissan key fobautozone license plate holder1010tires reviewshine auto projectniche wheels for salecobalt turbo vs superchargerkicker 10l72004 infiniti g35x mpgavic 4000nexhow to drift in an automatic rwdaluminium driveshaftrx 8 coupewagner rotors reviewfront lower control arm compliance bushingalarm wiring diagramyokohama tires reviewscf vinyl wrap2006 infiniti m35 catalytic converter350z dashgeneral gmax tire reviewsfeal 441 coiloversxxr 518rsx type s insurance