Makeshift Oil Catch Can - Page 3 - - Infiniti G35 & G37 Forum Discussion | rupromenergo.ru
Show Your Support Become A Premier Member

    > >
  • Reload this Page >
    • Makeshift Oil Catch Can


Makeshift Oil Catch Can

Thread Tools Rating: Thread Rating: 7 votes, 5.00 average.
Old 05-02-2006, 03:29 PM
Registered User
iTrader: (1)
Join Date: Dec 2005
Posts: 143
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by andy2434

I drove a total of 24.1 miles, today. This was half/half mileage to and from work. As soon as I got home, I checked the catch bowl. There was a good 2 to 3 drops of oil sitting at the bottom of the bowl. Now, I am wondering how much oil vapor got passed through this set-up.
not the most efficient way, but if you are really curious you can try extending the hose length of the system and use two filter things, one higher up the line and one a bit spaced away and compare the difference collected from the first and the second to get a gauge of how much passes by the first.
Old 05-02-2006, 03:35 PM
Andy2434's Avatar
Super Moderator
Thread Starter
iTrader: (6)
Join Date: Apr 2005
location: S.F. Bay Area
Posts: 11,717
Thanks: 0
Thanked 1 Time in 1 Post
Quote:
Originally Posted by Bobalude
not the most efficient way, but if you are really curious you can try extending the hose length of the system and use two filter things, one higher up the line and one a bit spaced away and compare the difference collected from the first and the second to get a gauge of how much passes by the first.
Hey, it may not be the most efficient way, but it works. I mean it could extend beyond 2 catch bowls, but this would work for the fun and curiosity sake of it. Thank you for you productive comments.
Old 05-02-2006, 04:27 PM
Registered User
iTrader: (2)
Join Date: Dec 2005
Posts: 3,080
Thanks: 0
Thanked 1 Time in 1 Post
Ok so I made the same setup as Andy...after 2 days of driving there was oil in the filter...it was not even a 10th of an ounce...it was like 5 drops from an eye dropper...
Old 05-02-2006, 10:33 PM
Glex25's Avatar
Administrator
iTrader: (19)
Join Date: May 2005
location: New Jersey
Posts: 4,654
Thanked 74 Times in 30 Posts
I have complained to the dealer before about always needing a Quart of oil in between oil changes and they have always said it was normal.
So Andy i followed your instructions to a T to see if this is where my oil is going.
I drove the car for a few pushing it here and there to see how much oil the oil catcher would catch using the different driving methods.
Here are my results I installed it as soon as i got out of work which was 5:30PM and now its 9:10PM and i have driven about 25 Miles or so.
The pictures say it all.


One question though Andy does yours make a kind of sucking sound on the end that is not connected to the lower plenum(Manifold maybe).
I might take out that white part if it might be too restrictive.
Attached Thumbnails
Makeshift Oil Catch Can-dsc_0036.jpg Makeshift Oil Catch Can-img_1984.jpg Makeshift Oil Catch Can-img_1987.jpg
Old 05-02-2006, 10:55 PM
Registered User
Join Date: Apr 2005
location: BayArea
Posts: 425
Thanks: 0
Thanked 0 Times in 0 Posts
Looks simple enough of a mod. Thanks for the posting Andy.
Old 05-03-2006, 12:18 AM
Premier Member
iTrader: (3)
Join Date: Feb 2004
location: South
Posts: 3,671
Thanks: 0
Thanked 0 Times in 0 Posts
That looks like a bit too much for just 25 miles. I drive like 100 miles a day so I will see on mine. This will be interesting.

Quote:
Originally Posted by Glex25
I have complained to the dealer before about always needing a Quart of oil in between oil changes and they have always said it was normal.
So Andy i followed your instructions to a T to see if this is where my oil is going.
I drove the car for a few pushing it here and there to see how much oil the oil catcher would catch using the different driving methods.
Here are my results I installed it as soon as i got out of work which was 5:30PM and now its 9:10PM and i have driven about 25 Miles or so.
The pictures say it all.


One question though Andy does yours make a kind of sucking sound on the end that is not connected to the lower plenum(Manifold maybe).
I might take out that white part if it might be too restrictive.
Old 05-03-2006, 01:36 AM
Andy2434's Avatar
Super Moderator
Thread Starter
iTrader: (6)
Join Date: Apr 2005
location: S.F. Bay Area
Posts: 11,717
Thanks: 0
Thanked 1 Time in 1 Post
Okay . . . I drove some 24.1 miles yesterday and the catch bowl had a few drops of oil at the bottom. This afternoon I went shopping for a few goodies to enhance this mod a bit more. I will post pics tomorrow evening. In any event, I pushed the G this afternoon. When entering the freeway on ramps, I floored it. No, no, no, . . . I never went over 70 mph. I just got there really fast. It was a spirited 37.8 miles and this is what I found at the bottom of the bowl.

Name: IMG_0201.jpg
Views: 168
Size: 45.3 KB

Then I poured the oil out into a plastic spoon to give everyone a better idea. Sorry about the picture quality.

Name: IMG_0202.jpg
Views: 170
Size: 29.1 KB

This amount of oil accumulated at the bottom of the bowl after a total of 61.9 miles. The inside diameter of the bowl is 1".
Old 05-03-2006, 01:39 AM
Glex25's Avatar
Administrator
iTrader: (19)
Join Date: May 2005
location: New Jersey
Posts: 4,654
Thanked 74 Times in 30 Posts
Yeah thats how much mine has accumulated.

now about the white filter did you remove it?

Are you hearing sucking noise when the car is running and you open the hood?

I'm thinking of throwing that oil back into the engine if its going to be like that what you think?

Andy can you get in contact with me thru AIM?

Last edited by Glex25; 05-03-2006 at 01:45 AM.
Old 05-03-2006, 01:46 AM
Andy2434's Avatar
Super Moderator
Thread Starter
iTrader: (6)
Join Date: Apr 2005
location: S.F. Bay Area
Posts: 11,717
Thanks: 0
Thanked 1 Time in 1 Post
Quote:
Originally Posted by Glex25
I have complained to the dealer before about always needing a Quart of oil in between oil changes and they have always said it was normal.
So Andy i followed your instructions to a T to see if this is where my oil is going.
I drove the car for a few pushing it here and there to see how much oil the oil catcher would catch using the different driving methods.
Here are my results I installed it as soon as i got out of work which was 5:30PM and now its 9:10PM and i have driven about 25 Miles or so.
The pictures say it all.


One question though Andy does yours make a kind of sucking sound on the end that is not connected to the lower plenum(Manifold maybe).
I might take out that white part if it might be too restrictive.

Alan,

No, I have not notice a sucking sound. However, as you mentioned, I have removed the white filtering element. Man, a few drops of oil yesterday . . . I was driving very conservative. I mean, how fast can one drive in the S.F. Financial area. However, I remember GEE PASTA saying that the oil deposits would get worst if the car is driven harder. Sooooo, I drove it much harder and . . . Well, you see the results.

Tomorrow, I will remove this current set-up and fabricate a stainless steel bracket of sorts to hold the oil catch bowl assembly . . . Along with a few other changes. I want to dress up the installation a bit.
Old 05-03-2006, 04:02 AM
Andy2434's Avatar
Super Moderator
Thread Starter
iTrader: (6)
Join Date: Apr 2005
location: S.F. Bay Area
Posts: 11,717
Thanks: 0
Thanked 1 Time in 1 Post
Quote:
Originally Posted by Glex25
Yeah thats how much mine has accumulated.

now about the white filter did you remove it?

Are you hearing sucking noise when the car is running and you open the hood?

I'm thinking of throwing that oil back into the engine if its going to be like that what you think?

Andy can you get in contact with me thru AIM?
Glex25,

Unfortunately, I am not a fan of instant message platforms . . . And as such, my rig is not set up for it. PM me, if you like.

I think you and Alan may be experiencing the same so called "Sucking" sound. Try removing the white filter element, as DaveO had suggested. This may remedy the sound and definitely free up the flow of things.

Hmmm . . . Recycling the oil? I would rather just pour it out. That stuff is not really good any more. Example . . . I just recently change my engine oil some 500 miles ago. The oil on the dip stick is very clean and clear and that stuff at the bottom of the catch bowl is fowl looking. I would not want to mix that sludge with my clean oil. Chances are that sludge is not very good for your engine or your existing oil.
Old 05-03-2006, 07:45 AM
O.F. Administrator
iTrader: (4)
Join Date: Jun 2002
location: Cambridge, Ont. Canada
Posts: 30,341
Thanks: 0
Thanked 7 Times in 5 Posts
Great mod, guys. Kudos to Dennis, Dave, and Andy for doing much of the leg work on this.

Colin.
Old 05-03-2006, 08:23 PM
Andy2434's Avatar
Super Moderator
Thread Starter
iTrader: (6)
Join Date: Apr 2005
location: S.F. Bay Area
Posts: 11,717
Thanks: 0
Thanked 1 Time in 1 Post
Alan & Glex25,

With regard to the "Sucking" noise, please check the 2 hoses on either side of the catch bowl . . . And see if either hose has collapsed inwardly, if you will. Perhaps, there might be enough "negative pressure acting on one the hoses and thus craeting the sound which you are hearing. I'm thinkign if this is the case, it might be the hose connected to the PCV. Hmmm . . . If that is the case . . . Perhaps, a fuel injection hose of sorts might be better suited.
Old 05-03-2006, 09:24 PM
DaveO's Avatar
Registered User
iTrader: (2)
Join Date: Aug 2002
location: Hi Desert, Kalifornia
Posts: 1,129
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by andy2434
Alan & Glex25,

With regard to the "Sucking" noise, please check the 2 hoses on either side of the catch bowl . . . And see if either hose has collapsed inwardly, if you will. Perhaps, there might be enough "negative pressure acting on one the hoses and thus craeting the sound which you are hearing. I'm thinkign if this is the case, it might be the hose connected to the PCV. Hmmm . . . If that is the case . . . Perhaps, a fuel injection hose of sorts might be better suited.
A sucking noise could be from a vacuum leak. In addition to the hoses/clamps, there's an O-ring between the top of the bowl and the housing that may not be seated properly.


DaveO

Last edited by DaveO; 05-05-2006 at 10:45 AM.
Old 05-03-2006, 09:32 PM
drsifu1's Avatar
Staff ALUMNI
iTrader: (11)
Join Date: May 2003
location: San Diego Area
Posts: 2,394
Thanks: 0
Thanked 7 Times in 6 Posts
FYI...

we use these "coalescing filters" at work. the purpose is to catch water before it enters sensitive equipment.

not sure how much of a vacuum is created, but it may be enough to push oil into and out of the catch can. so what you see may be only some of the oil that is caught in the bowl.

an ideal design and one that i think is implemented in quality oil catch cans, are internal baffles. this allows oil to go inside the can, but makes it that much harder for it to go outside the catch can.

in either case, the rig you have there does do its intended job, but I'm sure not 100% of the oil is being caught.
Old 05-03-2006, 09:33 PM
Andy2434's Avatar
Super Moderator
Thread Starter
iTrader: (6)
Join Date: Apr 2005
location: S.F. Bay Area
Posts: 11,717
Thanks: 0
Thanked 1 Time in 1 Post
I just switched a few things around to clean up the catch bowl install. The 2 following pics are with the engine shut "OFF."

Name: IMG_0003.jpg
Views: 171
Size: 50.8 KB

Name: IMG_0002.jpg
Views: 170
Size: 55.1 KB

Now, I have a question . . . Look at the following 2 pics with the engine idling . . .

Name: IMG_0007.jpg
Views: 169
Size: 55.9 KB

Name: IMG_0006.jpg
Views: 168
Size: 35.5 KB

For a lack of a better description, the 2 hoses are sucked in. I don't know if you can tell from the pics, but they closed up, if you will. The cars seems to be idling just find. When my wife gets home, I'll have her rev it a bit while I watch. I didn't notice this before. I was trying to figure out what the sucking sound might be as per Alan and Glex25 and decided to look under the hood while the car was idling . . . And to my surprise . . . LOOK!

Everything is working fine. I took the car around the block and eveything seems normal.

Edit: When I shut the engine off, the hoses gp back to round. The angle of the pic is poor for the hose coming from the PCV valve. That particular hose is almost flat in the horizontal position with the car idling.

Last edited by Andy2434; 05-03-2006 at 09:43 PM.

Related Topics
Thread Thread Starter Forum Replies Last Post
100k service time f22raptor G35 Sedan V36 2007- 08 7 03-18-2016 09:50 AM
Really wanted to stay, but had to let go :(.. prinny The G-Spot 6 11-23-2015 12:07 AM
G35 non-rev up oil consumption mbe32 G35 Coupe V35 2003 - 07 10 11-14-2015 12:09 AM
Melanie Blue 9tray turbo Media Share G35 Coupe V35 4 09-29-2015 11:22 PM


Tags
air, catch, circular, compressor, depot, dimension, filter, fuel, g35, greddy, hda70403av, hda70600av, home, hose, husky, makeshift, oil
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 10:36 PM.


Copyright ©2002 - 2017, rupromenergo.ru All Rights Reserved. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in:

Related pages


altima nismo spoilerssr koenig wheelsalpine cda 9886g35 custom sub boxcaliper torque specsskyline australia forumnismo hoodiedeepest concave wheelsmb quart 6.5 component speakerscalifornia vehicle code tinted windowsxm radio previewflywheel promonitrous express proton1 inch drop springsstance sc5 wheels for salevolk gtvlinea corse lemans wheelssteep tech apogee jackettanabe concept g exhaustg spot sacramento caz1 motorsports reviewg35 plenum spacer2007 nissan 350z turbo kit2012 infiniti g37 0-60clay bar to remove water spotshow to make your subwoofer hit hardervendor pronunciationprotect car from door dings350z ksport coiloversare konig rims goodalpine mrp-m850rockford p2002 ampsuper advan v2m35 vs m37po340 code2006 g35 coupe reviewvolk re30 weightbrightest hid bulbsstock srt4helix throttle body spacerpowermax usa alternators reviewstance concave wheelsballer carsg37 wheel spacersyakima kingjoeremote start sioux fallspioneer avh-x3600bhs2004 g 35nissan maxima forums2007 infiniti m45 specsmemphis 12sfs rimsbbs lm greyaps exhaust350z intakecentric high carbon rotorsmy car shakes when in parkrear quarter panel dent repair26708 a 1 vc2003 g35 dash kithomemade oil catch canaudi a4 quattro in snowautocross trailercan i mix different octane fuel gradesdeep dish rims and tiresalpine type x 12 for salewho makes napa gold oil filters2006 m35how to remove rust from brake rotorsblistex tiresfloor jack adapter pinch weldescort radar power cordwho makes mopar oil filterswhat does the bcm controle30 xxr 002are rebuilt titles bad2007 m6 0-60konig wheels canadahow to tint front windshield stripsumitomo htr as po1