AC line damaged... - - Infiniti G35 & G37 Forum Discussion | rupromenergo.ru
Show Your Support Become A Premier Member

    > >
  • Reload this Page >
    • AC line damaged...


AC line damaged...

Thread Tools Rate Thread
Old 07-06-2010, 02:17 AM
Registered User
Thread Starter
iTrader: (2)
Join Date: Sep 2003
location: Fremont, CA
Posts: 177
Thanked 0 Times in 0 Posts
AC line damaged...

My AC line next to the air intake was rubbing up against the intake hose clamp and caused a leak in the line (H). Is this something that can be easily fixed with some type of sleeve? Or does it require replacing the entire line?
Old 07-06-2010, 02:52 AM
Registered User
iTrader: (17)
Join Date: Feb 2010
location: Bay Area 925
Posts: 3,128
Thanked 135 Times in 114 Posts
i would say you could prolly patch it.
Old 07-06-2010, 06:36 AM
Registered User
iTrader: (12)
Join Date: Mar 2010
location: Seneca, SC
Posts: 661
Thanked 105 Times in 74 Posts
You can try patching it, I would have it evacuated than cut area out and reconnect using a coupler with compression fittings. After repair have it evacuated and leak checked before recharging.
Old 07-06-2010, 06:47 PM
Registered User
Thread Starter
iTrader: (2)
Join Date: Sep 2003
location: Fremont, CA
Posts: 177
Thanked 0 Times in 0 Posts
from the mechanics I've contacted, they all suggest replacing the line. No one suggested patching or retro-fitting with a coupler. Estimate is about $500 to fix.

HotRodG35, can I simply use a copper coupling with compression fittings and o-rings from Home Depot? or are there specific types to use? I suppose I can go this route first to see if it works before replacing the entire line.

Thanks for any help you can provide.
Old 07-06-2010, 10:37 PM
Choleaoum's Avatar
Registered User
iTrader: (9)
Join Date: Feb 2009
location: Long Beach, CA
Posts: 845
Thanked 3 Times in 3 Posts
Quote:
Originally Posted by HotRodG35 View Post
You can try patching it, I would have it evacuated than cut area out and reconnect using a coupler with compression fittings. After repair have it evacuated and leak checked before recharging.
I wish I thought of that when I had the issue. I was lucky, I found the AC line on craigslist for only 10$ bucks!!! Installed it myself too lol.
Old 07-07-2010, 06:15 AM
Registered User
iTrader: (12)
Join Date: Mar 2010
location: Seneca, SC
Posts: 661
Thanked 105 Times in 74 Posts
Quote:
Originally Posted by spinn View Post
from the mechanics I've contacted, they all suggest replacing the line. No one suggested patching or retro-fitting with a coupler. Estimate is about $500 to fix.

HotRodG35, can I simply use a copper coupling with compression fittings and o-rings from Home Depot? or are there specific types to use? I suppose I can go this route first to see if it works before replacing the entire line.

Thanks for any help you can provide.
You can use a brass coupler with compression fittings which does not require o rings. This is a common method of repairing Residential/Commercial AC lines with minor damage. This method will work if done correctly. Your AC line pressure should not exceed 55#, the brass coupler is more than capable of handling the pressure. Factory AC line has enough length to allow small amount of removal.

Last edited by HotRodG35; 07-07-2010 at 07:44 AM.
Old 07-07-2010, 07:37 AM
Registered User
iTrader: (12)
Join Date: Mar 2010
location: Seneca, SC
Posts: 661
Thanked 105 Times in 74 Posts
Quote:
Originally Posted by Choleaoum View Post
I wish I thought of that when I had the issue. I was lucky, I found the AC line on craigslist for only 10$ bucks!!! Installed it myself too lol.
You got lucky finding that deal on a AC line. Ultimately its more work but your keeping the OEM integrity, good job on the DIY installation.
Old 07-07-2010, 07:44 AM
jwrape's Avatar
Registered User
iTrader: (3)
Join Date: May 2009
Posts: 959
Thanks: 0
Thanked 0 Times in 0 Posts
Had the same issue and tried to use a compression fitting but then just went ahead and bought a used line for $30 and fitted it on. I'm driving cool now.
Name: IMG_0909.jpg
Views: 95
Size: 85.6 KB
Name: IMG_0903.jpg
Views: 83
Size: 39.3 KB
Name: IMG_0902.jpg
Views: 81
Size: 35.1 KB
Name: IMG_0901.jpg
Views: 91
Size: 45.8 KB
Old 07-07-2010, 12:03 PM
Registered User
Thread Starter
iTrader: (2)
Join Date: Sep 2003
location: Fremont, CA
Posts: 177
Thanked 0 Times in 0 Posts
jwrape, that's basically the same location where mine is damaged. I can get a new line for about $50 shipped, which isn't a problem. Where'd you get yours from?

How difficult was it to get the line out? Did you evacuate the system first?

Thx!
Old 07-07-2010, 01:43 PM
Choleaoum's Avatar
Registered User
iTrader: (9)
Join Date: Feb 2009
location: Long Beach, CA
Posts: 845
Thanked 3 Times in 3 Posts
Quote:
Originally Posted by HotRodG35 View Post
You got lucky finding that deal on a AC line. Ultimately its more work but your keeping the OEM integrity, good job on the DIY installation.
Thanks. I'm going to keep that copper trick in mind just incase a friend of mine asks me lol.
Old 07-19-2010, 01:15 AM
Registered User
Thread Starter
iTrader: (2)
Join Date: Sep 2003
location: Fremont, CA
Posts: 177
Thanked 0 Times in 0 Posts
anyone have any ideas how to take off the hi pressure line attached to the firewall area? I don't have the Inifiniti tool, but got one of the Lisle ac disconnect tools that slip over the line and supposedly helps unclick the line, but I couldn't remove it. Should it just pop off with ease? Am I supposed to pull on the disconnect tool and the line at the same time? Looked like it was going to be easy fix, but now it's going to take more time...
Old 07-19-2010, 01:56 AM
Registered User
iTrader: (17)
Join Date: Feb 2010
location: Bay Area 925
Posts: 3,128
Thanked 135 Times in 114 Posts
hmm im not positive about what your talking about...maybe take a pic...is it a plug? most of the plugs or hoses in our engine bay are easy to take off...the plugs have a little clip on the bottem you push in and wiggle it free and hoses have a metal ring [forgot the name] that you losen with a flat head and then use a little muscle and pull it free...worst case senario is you break a broken part a bit more...you can always call your local dealership for advice they wont charge for for that...
Old 07-19-2010, 01:53 PM
Registered User
Thread Starter
iTrader: (2)
Join Date: Sep 2003
location: Fremont, CA
Posts: 177
Thanked 0 Times in 0 Posts
it is the AC high pressure line plug that plugs into the firewall line. The little white ring that clips into the plus is missing a "clip" and it won't push in to disengage the line.
Old 07-19-2010, 01:56 PM
Registered User
Thread Starter
iTrader: (2)
Join Date: Sep 2003
location: Fremont, CA
Posts: 177
Thanked 0 Times in 0 Posts
On another note, is there any chance of damage to my AC condenser or compressor or the system, if I don't get this fixed right away? As soon as I found out about the leak, I have not turned on the AC and will not until it's fixed. Should it be OK?
Old 07-28-2010, 08:10 PM
Registered User
Thread Starter
iTrader: (2)
Join Date: Sep 2003
location: Fremont, CA
Posts: 177
Thanked 0 Times in 0 Posts
Ended up having to buy the Nissan/Infiniti AC line disconnect tools to finally pop off the line, as I could not find this at my local parts store. Paid $17 for the 2 tools to disconnect the hi and low pressure AC lines. Used them and they easily popped off. Now to get the new line in there, vacuum, and refill...

Related Topics
Thread Thread Starter Forum Replies Last Post
DIY: Remove Gas Pump to Clean Sending Unit & Clear P0463 Code RemmyZero V36 DIY 6 08-07-2017 09:40 PM
Complete Clutch Flywheel Kits AL8782 G35 Coupe V35 2003 - 07 4 10-03-2015 11:26 AM
Sticking Caliper Issue dcsbh1 Brakes & Suspension 0 10-01-2015 04:15 PM


Tags
ac, compression, coupler, disconnect, fit, fitting, fittings, g35, high, line, lines, metal, patch, pressure, repair
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 01:47 PM.


Copyright ©2002 - 2017, rupromenergo.ru All Rights Reserved. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in:

Related pages


350z brake kitichiro suzuki gayhouston import forumkazera kz vaudi s4 comparisonplasti dip longevitybad wheel hub noisenismo gear knob 350zinfiniti ipl wheelsma tint lawsbmw 540i 2005brake rotor rust removal350z stillen wingbmw 335 forums2004 infiniti g35 sedan customstoptech street performance brake pads reviewr100 sparcoinfiniti g37 user manualsr20 swap costadhesive remover wheelvarrstoen center cap sizeg35 6 speedsts twin turbo kitg35 tire pressure sensorcylinder three misfiretransit clutch problemskumho ecsta tires review350z prochargerd2s bulb wikig35 coupe rims for salenankang as1 stretchinfiniti g37 modscold air intake vs short ramavic z110bt updateaaa tire patchxxr 006350z wheelsg35 coupe awdcross drilled vs slottedalpine amp 1000 wattsram air vs cold air intakeoil k&n filterkenwood dnx9960te37 magnesium blueglass cleaner for tinted windowsduralast rotor reviewoil catch can ls1momo polk audiovin specs lookupremove caliper paintgarage door seals home depothow to stop rack and pinion leakdent wizard san diegoroyal purple 75w-140trailer hitches for motorcycles2004 audi a6 2.7 t 0 60markham infinitytokico struttakata seatbeltpioneer avh p4100duralast reviewsblox shift knob reviewmazdaspeed 3 18x9g35 tein coiloversengine life expectancyxxr 530 18x9.75 goldfram tough guard oil filterisimple aux inputsparco chrono seatscustom g35 sedancar overheating plenty of coolant