2003 G35 Coupe Driver's side Window not working...*HELP!* - Page 3 - - Infiniti G35 & G37 Forum Discussion | rupromenergo.ru
Show Your Support Become A Premier Member

    > >
  • Reload this Page >
    • 2003 G35 Coupe Driver's side Window not working...*HELP!*

2003 G35 Coupe Driver's side Window not working...*HELP!*

Thread Tools Rate Thread
Old 07-10-2008, 10:44 AM
LR-G's Avatar
Registered User
iTrader: (1)
Join Date: Jul 2007
Posts: 225
Thanked 0 Times in 0 Posts
just had mine replaced.
started with the creaking while going up and down.
and when fully closed it would creak and when I hit bumps.

changed under warranty. but i didnt think its so common.
probably due to design?
Old 07-31-2008, 07:22 PM
Registered User
Join Date: Jul 2008
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Passenger Side Window Problems

6 months in after buying my 350Z I had a similar problem. Passenger side window does not go back up. Sometimes when I push up once, it usually goes all the way back up, but then about half way it goes back down. So far I have learned that if I hold the up button, it goes all the way up no problem. If it gets hot or whatever sometimes it just clicks when I push up and nothing happens.
If you open the door and push the window button to "up" and while holding up close the door, the window usually goes up. But that is just a temporary fix. I am waiting for the thing to completely go bad before I open it up.
Old 07-31-2008, 10:32 PM
Registered User
iTrader: (3)
Join Date: Jun 2004
location: Only in San Diego
Posts: 1,029
Thanked 10 Times in 9 Posts
Originally Posted by G35Kidd237
Hey thanks Sponger, you saved me 300 dollars lol... ebayed the motor for 20 bucks and installed it through your guide, thanks again.
Sweet. Go ahead and PayPal me half the difference
Old 08-07-2008, 06:16 PM
Registered User
Join Date: Dec 2005
location: Fresno
Posts: 764
Thanks: 0
Thanked 0 Times in 0 Posts
hi guys,
I guess we all have the same freaky window problem with our G. I have a 04 coupe and lately, my driver window isn't goes up or down, passenger side is fine. I heard you could do it yourself by clean the motor or replace it. My warranty was over so I need to pay it from my pocket. If you guys have that link about this window removal/replacement, please forward. Thanks guys
Old 08-08-2008, 02:23 PM
Registered User
iTrader: (1)
Join Date: Jan 2005
Posts: 373
Thanks: 0
Thanked 2 Times in 2 Posts
Here is the link: http://rupromenergo.ru/forums/body-interior-exterior-lighting-diy/218286-diy-ower-window-motor-replacement.html

I did it a few weeks ago and it is pretty easy. I bought my replacement motor from Autozone.
Old 01-24-2009, 09:36 AM
Registered User
Join Date: Jul 2008
Posts: 110
Thanks: 0
Thanked 0 Times in 0 Posts
I ran across this thread while searching for tips on removing my door panels to install Dynamat.

Seeing this issues with the window motors got me thinking..

Looking at the photos, it appears that the motor case dose not have any vents. The case is sealed. Most electric motors have some form of ventilation for cooling and to allow some carbon and metal build up to move away from the brushes. Some have had success with cleaning their motors which leads me to believe that build up on the brushes and the commutator is the problem. Other than a short in the windings, worn our or dirty brushes/commutator or a seized bearing, there is not much else in an electric motor that would cause a failure.

Guys who race electric RC cars (not the Toys R Us type- I am referring to 60mph carbon fiber rockets) use spray motor cleaners after every race. Some of these cars use motors that spin at over 30,000 RPM's. They spray the inside of the motor down while it is running, let it dry and then lightly lubricate the bearing shafts. Many use a spray electrical parts cleaner or even Non-Chlorinated Brake Cleaner.

My window motors are working fine. While Dynamating, I will play around and clean my motors and report back.
Old 01-25-2009, 07:49 AM
Registered User
Join Date: Jul 2008
Posts: 110
Thanks: 0
Thanked 0 Times in 0 Posts
I think I figured it out!

While Dyanmating my doors, I pulled the window motors apart and I was shocked to see the amount of junk inside them! Mind you that my windows have been working fine- but it was clear that it was only a matter of time before they failed.

It is my opinion that the carbon and metal flake build up in these motors are causing a short in the motor. Bad thing is that guys who replace their motors can expect the motors to go bad over and over. The root cause is the motor case is sealed and there is nowhere for the carbon and metal flakes to go. They just build up inside the motor until it fails. I am 99.9% sure that we are stuck cleaning the motors until Nissan redesigns the motor.

I was going to post pictures, but I found a link to My 350z.com that has outstanding pictures and directions on how to clean your window motors- with one exception.... Nowhere does it mention re-lubrication the motor after cleaning.

READ THIS!!!!-- You MUST lubricate (but not over lubricate) the top and bottom bushing shafts after cleaning the motor!!!

Some have reported that their motors worked for a while after cleaning then failed again. I suspect this is due to not properly re-lubricating or over lubricating the motor. I used electric motor cleaner and lubricant used for RC car motors purchased at a hobby shop. We shall see if this is the solution.

Link with pictures-

Last edited by wingsprint410; 01-25-2009 at 08:09 AM.
Old 01-26-2009, 02:16 PM
Registered User
Join Date: Jul 2006
location: Sunny CA
Posts: 734
Thanks: 0
Thanked 0 Times in 0 Posts
Is it always the motor? Mine does not close that last 1/4 to 1/2" when the weather is very cold. Works normal in warm or temperate conditions.
I can still close it when it is very cold, I just have to hit the 'UP' button again, in other words it seems to work manually, not automatically.
I was wondering if it might only be a lube problem for the guides, etc. or does it mean the motor is on it's last legs.
Old 01-26-2009, 02:21 PM
IrockAG35's Avatar
Ohio G Club moderator
iTrader: (31)
Join Date: Jan 2008
location: KY tri state area/FL keys
Posts: 3,369
Thanked 4 Times in 4 Posts
same thing happened to my jeep, sounds like the motor burned out...the infinti window motor is an easy swap, much easier than jeep...i have seibon CF doors..when i took my oem window/motor out..its all basic..search for one..shouldnt be to hard to find..if you need a walk through pm me. gl
Old 02-11-2009, 10:33 PM
Registered User
Join Date: Aug 2008
Posts: 61
Thanks: 0
Thanked 0 Times in 0 Posts
Just wanted to follow up with what Wingsprint410 has said about the carbon and metal flake build up in these motors.....I too am having the same problem with my window not rolling down...I am going to attempt to clean the motor in the hopes that this will solve my problem....Has anyone cleaned there motor and noticed that the problem has been resolved...or is the problem in fact a faulty motor which needs to be replaced?

I am debating whether or not to buy a new motor right now as my warranty has expired.
Old 02-12-2009, 03:23 PM
Registered User
iTrader: (4)
Join Date: Aug 2004
location: San Francisco, CA
Posts: 852
Thanks: 0
Thanked 3 Times in 1 Post
It worked on mine. Make sure you only re-grease the parts that were originally greased though, don't over do it. Qtips and microfiber rags work great to clean out the shavings, u could also use a strong magnet if your having problems getting out the shavings.
Old 06-26-2009, 03:37 PM
Registered User
iTrader: (1)
Join Date: Feb 2008
Posts: 222
Thanks: 0
Thanked 0 Times in 0 Posts
If the motor has a gear with teeth on it its easy to fix but if its a cable I don't know how to fix that one. If its the one with the gear or whatnot I fixed my g/f car which is a hyundai santa fe but window motors are basically all the same. What I did was take the motor apart and it has like a center shaft that has a copper piece attached to the shaft now what you do is to take a piece of sandpaper and sand it down a bit to get the contacts cleaned that way when you assemble it back together it should start back up. Basically contacts get dirty and from use or lack of and you have to sand it down a little to clean them up.
Old 03-13-2010, 03:38 AM
Registered User
iTrader: (5)
Join Date: May 2005
location: Santa Clara, CA
Posts: 2,171
Thanks: 0
Thanked 70 Times in 34 Posts
Just finished up the DIY video for this:

G35 Coupe Window Motor Replacement
Old 10-14-2010, 05:38 PM
Registered User
Join Date: Oct 2010
location: Miami
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Hi my name is Alfredo and i am new here. I'm 17 and i bought a 2004 g35 coupe like 2 months ago. I wanted to ask this question because i am not sure whats happening to me is the same here. My passenger window goes down and up when you open the door and close it but when you try to lower it and raise it on the inside it wont work. Is that the motor that i have to replace or is it something else. Thanks
Old 10-14-2010, 05:47 PM
g35action's Avatar
Join Date: Oct 2010
location: La La Land
Posts: 32
Thanks: 0
Thanked 0 Times in 0 Posts
Just bought a 03 G35 and the passenger window isnt working. You would think Infiniti would have done a recall on these thing because it looks as if they all do it.

How many hours does a dealer charge to replace this. I have a rebuilt one sitting on my bench and dont feel like trying to do it my self.

Related Topics
Thread Thread Starter Forum Replies Last Post
Am I delusional or does the G35 have a damn good stock exhaust note? TWASkyliner G35 Coupe V35 2003 - 07 26 08-07-2015 08:51 AM
WTB: 2003-2006 Driver's side seat TAN/Willow si_driver Interior 1 07-25-2015 09:22 AM
New Owner - South Carolina Tom_P New Members Check In 5 07-24-2015 04:05 PM
How much is my car worth? 2004 6MT Brembo.. vstypicals Buying, Selling & Leasing Discussion 6 07-20-2015 10:55 PM
Looking at G35's.... Chattzx The G-Spot 1 07-17-2015 11:23 AM

2003, coupe, drivers, forum, g35, infiniti, passenger, problem, problems, procedure, reset, side, window, windows, working
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -4. The time now is 02:35 PM.

Copyright ©2002 - 2017, rupromenergo.ru All Rights Reserved.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
  • Ask a Question
    Get answers from community experts
Question Title:
Your question will be posted in:

Related pages

vortex electric superchargerkenwood kvt-514 accessoriesruff racing center caps2008 g35 specstopspeedautok&n drop instillen g37 intaketop rated cold air intakehow to replace nissan key batteryinfiniti scheduled maintenanceplenum spacer 350zbrake noise when braking slowly6x9 woofernismo wheelultrabrightlights comhow to put an aux port in your car4th gen maximanail tire repairmaxima vs g37350gt infinititier 1 fico credit scoreg35 performancebosal shapertein rsx coiloverscat back exhaust systems reviewskei office2006 m35how much horsepower does cold air intake addbuddy club railstps report coverbird poop staincostco tires nitrogeneibach alignment kitair suspension vs coilovers3m 1080 vinyl wrap gloss blackhow much does headlight restoration costnew rack and pinion stiffduralast cmax brake pads reviewembee powder coatingxbox 360 jasper motherboardcustom fiberglass enclosureshow to read a transmission fluid dipstickvortech bypass valve2008 g37 sradiator fan does not turn offturbomagazinevq35hr performance partsis it expensive to replace a clutchpolishing exhaust tipskw variant 2 coilovers reviewhydro shield for cold air intakenissan 350z twin turbo for salelegal tail light tintcontinental extreme dwsthrottle body spacetorque specs for wheel hub assemblyrb25det swap kitscare tactics ratbrembo brakes 350zenergy suspension shock bushingsenkei rpf1 18x9.5cost of replacing headlightgf210circle infiniti nj2003 g35 radiolsx swap kit2003 infiniti g35 sedan horsepowerstillen headerskey stuck in the ignitionalignment camber kitsparco bucket seats for saleinfiniti 2001 qx4vossen rims canadaremove rotorsraybestos rotors reviewinfiniti g35 sedan interiorvolk gts for saleinfiniti g35 seats